Natural stone has an elegance that can leave a wow factor and a long lasting impression on any floor or wall. To keep this impression in good condition, you need to make sure that all stone restorations being done are done by professional specialists who have the expertise to do so. Stone restoration in Melbourne is not as hard as you think. All it requires is a little imagination and you can turn an old Victorian facade into a feature wall or a floor.
As a professional stone restoration expert you can work with different styles of natural stone. One of the most popular choices being used nowadays are marble, granite, limestone and slate. Each of these stones has its own unique characteristics, but they all go back to the same thing: the application of sealant. The methods vary when it comes to stone restoration, but the end result is always the same.
It is important to know that all of these stones are porous in nature. If you are to use sealant, then the stones must be sealed before being restored. This is because natural stone consists mostly of silica, which is a natural grout. Sealing the stone will help prevent water from penetrating deep into the grout leaving unsightly stains. In order for the stone to last for years to come, sealant is a must.
There are a few ways in which you can restore your stone. One way would be to use water. Water is actually the stone’s best friend as it gives it protection and reduces the amount of cleaning you have to do throughout the years. You should however make sure that the water you use has been purified and that it is safe for the stone. If you want to use a power washer, then you should do your research first and get the materials from a reputable manufacturer.
If you have stained stone surfaces, then you should first take care of the staining and then use stone restoration. Stone staining comes from getting dirt and other stains on the stone surfaces and then wiping them off. However, this may not always work. If the stain remains, then you should first try to remove it. Naturally, you would want your stone surfaces to look as natural as possible.
To remove stains, you should use an oxygen bleach. It is safe to use and it works quite well on marble, granite and limestone stone surfaces. Do note that you should not use bleach on colored stone. Simply use a duster or a regular paper towel. Oxygen bleach is effective in removing stains from stone surfaces that have a high natural polish.
You can also use a stripper. Stone strippers work by using coarse abrasive materials that are then pushed deep into the stone surfaces to remove stains. The stones get damaged and get roughened up during the process. Stone strippers are safe to use on all types of stone surfaces; however, you need to get some professional advice before attempting to use one of these devices on your own. If the stripper does not give good results, then you should consider another method.
Stone restoration in Melbourne can transform dull stone surfaces to look like new. Stone restoration is a great idea that can save you money and time. Stone restoration Melbourne involves not only restoring a stone surface, but also improving its polish and brightness. In most cases, this will restore your stone to like-new condition.
Home maintenance is a key component of stone restoration. If you want to get rid of stains from your stone walls and floors, for example, you should get them scrubbed down regularly with an oxygen-based stone cleaning solution. Stains should be cleaned using a regular household detergent. You should rinse the area thoroughly and allow it to dry thoroughly before you apply a topcoat of finishing sealer. This will ensure that stains do not come back.
There are many stone restoration products available for you to use for your stone surfaces. You can go to a hardware store and purchase a variety of stone cleaners, polishes and stains. Stains should always be wiped down and buffed before they are applied to stone surfaces. Stone surfaces can also be stained with an epoxy coating.
Stone restoration in Melbourne is a great way to get the best out of your stone surfaces. You can spruce up lifeless stone surfaces and give them a fresh and vibrant look. The more time and effort you put into stone restoration, the better results you will achieve.
